50
Recording Mode
One Touch Recording (OTR)
This function enables you to set up the timer during
the recording process. Once the scheduled time is
reached, the system will stop recording automatically.
1. Enter the «Recording Mode» and start recording.
2. For desired timer recording, press the [
REC/OTR
]
button once or several times.
z
The recording time will increase by 30 minutes
with every pressing of the [
REC/OTR
] button.
If the scheduled time exceeds the recordable
time of the disc, normal recording mode will
restore.
z
If the timer recording is paused or stopped, the
system will cancel the timer recording process.
2. This unit can also record the VCR content of the
DV.
z
The connection method is the same as stated
in the first 3 steps of 1.
z
Switch on the «Power» button of the DV to enter
the VCR status, and the VCR status is «Stop».
z
Use the remote controller of the unit to complete
the operations of the DV, including STOP, PLAY,
PAUSE, FB, FF, etc.
z
Press the [
REC/OTR
] button and then press
the [
PLAY
] button to start recording.
z
During the recording process, press the
[
PAUSE
] button to suspend recording of the
unit, and press the button again to suspend the
DV. To restore play of the DV, press the [
PLAY
]
button; if you press the [
REC/OTR
] button, the
play of the DV and the recording of the unit will
resume at the same time; press the [
FWD
],
[
REV
] button to complete forward or rewind
operation for the DV, while it reports Pause
status to the unit; If you press the [
STOP
]
button, the recording of the unit will stop first,
and press again to stop the play of the DV.
DV Controlled Recording
1. This unit can realize real-time monitoring and
recording for a DV through the IEE 1394 serial
port (DV).
z
Connect the DV to the unit (for details, see
«System Connection: System Connection for
Recording External Signals») by the front panel
inputs.
z
Switch on the power of the unit.
z
Press the [
DV
] button.
z
Switch on the «Power» button of the DV, set it
to the «Camera» mode, and start monitoring.
z
Press the [
REC/OTR
] button to start recording.
(Other operations is the same as in the
Recording Mode)
z
Do not move the unit or switch off the power during
the recording process.
z
The finalized DVD+R disc shall not be recorded.
z
Be sure to switch off the power of the unit and the DV
before connecting the DV cables.
Caution
