time and press the [
SELECT
] button to confirm. If
the input time is valid (less than the total length of
the current chapter or track), the system will start
playing from the input time.
z
You can only select any time point in the current
chapter or disc for playing.
z
If the input time exceeds the total length of the
current chapter or disc, the system will remain its
previous play mode.
62
Play Mode
In the playing status, press the [
GOTO
] button to
cycle through various options in the play control bar
menu. With the above-mentioned operations, you
can use the remote controller to enter the
corresponding value and skip to the corresponding
location directly.
z
The following is an example of DVD playing. The
operation of VCD playing is similar to this case.
z
For CD and MP3 discs, it is no use pressing the
[
GOTO
] button.
The Use of the «GOTO» Button
3. This function enables you to switch between
different channels by pressing the [
AUDIO
] button
directly
Subtitle Selection
Some DVD discs may have more than one kind of
subtitle. You can select one of them as the output.1.
1. In the play control bar menu, select the «Subtitle»
item.
z
There are some digits under the icon. The
number on the right is the total number of
subtitle languages provided by the disc; the one
on the left is the current selection. The default
value can be set in the «System Setup».
z
If there is a word «Off» under the icon, it
indicates that the subtitle is off. This value can
be set in the «System Setup».
2. Press the [
SELECT
] button to make the
«Subtitle» item available for selection.
3. Press the
T
or
S
button of the remote
controller to select the subtitle language, and
press the [
SELECT
] button to confirm.
4. This function enables you to switch differe
subtitle by pressing the [
SUBTITLE
] button
directly.
Some DVD discs may have more than one OSD
language. You may select one of them as the output.
1. In the play control bar menu, select the «Audio»
item. There are some digits under the icon. The
number on the right is the total number of OSD
languages; the one on the left is the number of
the current mode.
2. Press the [
SELECT
] button, use the
T
or
S
button to select the «Audio» item, and press the
[
SELECT
] button of the remote controller to
confirm.
3. This function enables you to switch between
different languages by pressing the «AUDIO»
button directly
Audio Selection
Audio Channel Selection
This function is available for CD, VCD and MP3
discs.
1. In the play control bar menu, press the
T
or
S
button to select the «Audio» item, press the
[
SELECT
] button to confirm and enter the input
mode.
2. Use the
T
or
S
button to select «Stereo»,
«Right» or «Left, and press the [
SELECT
] button
to confirm.
Multi-angle Switch
For some DVD discs, the pictures are shot from
different angles at the same time. While playing, you
can view from different angles.
1. In the play control bar menu, select the «Angle»
item.
2. Press the [
SELECT
] button to make the «Angle»
item available for selection. Enter a number and
press the [
SELECT
] button to confirm. Then the
angle will be changed.
There are some digits under the icon. The number
on the right is the angle of subtitle languages
provided by the disc; the one on the left is the
current selection
3. Press the [
ANGLE
] button to switch angles
directly.
PBC ON/OFF
Available only for VCD 2.0 or above versions.
1. In the play control bar menu, select the «PBC ON/
OFF» item.
2. Select the «On» or «Off» value and press the
[
SELECT
] button to enable or disable PBC
function.
3. Press the [
MENU
] button to enable or disable
PBC function directly.
