United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Page: 89 / 100

Advisor Advanced Manager Manual 81
Command Description Example
stop reporting [<num>]
stop [<num>]
Stop SMS reporting to the user
<num>, or for the sender, if
<num> is omitted, until the next
system set [2][3].
stop reporting 6
Stop reporting for user 6, until the
next system set.
stop
Stop SMS reporting for yourself,
until the next system set.
stop reporting permanent
[<num>]
stop perm [<num>]
Stop SMS reporting to the user
<num>, or for the sender, if
<num> is omitted, until started
again
via the “start reporting”
command [2][3].
stop reporting
permanent 6
Stop reporting for user 6, until it is
allowed by the “start reporting”
command.
stop perm
Stop reporting for yourself, until
started again.
register <phone> <num>
r <phone> <num>
Change phone number of the
user <num> to the new <phone>
[1].
Note: You cannot change your
own phone number using this
command. Use “Phone”
command instead.
re48555223322
6
Change phone number of user 6 to
the new one.
r +48223322555 9
Change phone number of user 9 to
the new one.
unregister <num>
unr <num>
Delete phone number of the
user <num> [1].
Note: You cannot delete your
own phone number using this
command.
unregister 6
Delete phone number of user 6.
unr 9
Delete phone number of user 9.
phone <phone> Change own phone number to
<phone>.
The command must be sent
from the old (currently
registered) phone number.
The registered phone is
changed permanently once the
next valid command is sent from
the new phone number. If the
next valid command is sent from
the old phone number, the
operation is cancelled.
phone +48555223322
Change the registered phone
number of the sender for the new
one. The next command must be
sent from the +48555223322.
pin <PIN> [<num>] Change PIN for the user <num>,
or for the sender, if <num> is
omitted [2].
pin 1234 6
Set user 6 PIN to 1234.
pin 4321
Set own PIN to 4321.
disable <num>
dis <num>
Disable SMS control for the user
<num> [1][4].
disable 6
Disable control for user 6
dis 9
Disable control for user 9
enable <num>
en <num>
Enable SMS control for the user
<num> [1][4].
enable 6
Enable control for user 6
en 9
Enable control for user 9