United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Page: 24 / 100

16 Advisor Advanced Manager Manual
• 15 min, 30 min, 1 h, 2 h, 3 h, 4 h: Set an appropriate time period to delay the
autoset.
Areas displayed during set and unset
If your system has not been programmed to display the areas assigned to your
PIN on the LCD, those areas are automatically set/unset (provided all zones
were normal).
The area LEDs illuminate when the set or unset procedure is successful.
If you are authorized to operate both on areas and area groups, you will be
prompted to choose between areas and area groups.
Select mode
>Areas<
Choose between areas and area groups, and then press Enter.
Area list
If the areas assigned to your PIN are displayed, any of those areas that are set
(or unset) will be listed. Depending on the keypad model and its settings, areas
are shown as a list or a symbolic line. For example:
0> All
1 * Office
— or —
1 2 3 4 5 6 7 8
█ [ ] √ x ? + +
Each area in the list has an indicator that describes its status. The following area
statuses are available.
Table 5: Area statuses and indicators for different keypads
Area status List Symbolic line
Ready to set
Space √
Not ready to set
? ?
Exit time
x x
Alarm
!

Set
* █
Part set 1
− [
Part set 2
= ]
Selected
+ + (blinking)
Depending on the type of the list, you now have the following options.