United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Page: 85 / 100

Advisor Advanced Manager Manual 77
— or —
• The same phone number is programmed for more than one user. The PIN is
then required to identify the user.
If the PIN field is required and the command does not contain the PIN code, the
following message is returned:
Command rejected, PIN required.
If the PIN field is required and the PIN is invalid, the following message is
returned:
Command rejected, invalid PIN.
If the PIN field is not required, the PIN must not be present in SMS message.
SMS command list
Table 14: SMS commands
Command Description Example
status
st
Get system status.
The command returns the
following: alarm in areas, areas
set, areas being set, partset,
unset, areas not ready, and fault
list.
st
Get system status.
area <area list>
ar <area list>
Get area names.
area 2
Get area 2 name.
ar 2 3 5
Get names of areas 2, 3, and 5.
set [<area list>]
s [<area list>]
Set areas.
If <area list> is “all”, or is
omitted, this is equivalent to a
list of all areas for which the user
has rights for the selected
action.
set
Set all allowed areas.
set 1
Set area 1.
s 2 3 5
Set areas 2, 3, and 5.
s all
Set all allowed areas.
unset [<area list>]
u [<area list>]
Unset areas. Parameters are
equal to the Set command.
unset
Unset all allowed areas.
unset 1
Unset area 1.
u 2 3 5
Unset areas 2, 3, and 5.
u all
Unset all allowed areas.