United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Page: 22 / 100

14 Advisor Advanced Manager Manual
Part set areas via LCD keypad
To part set areas via LCD keypad:
1. Provide an
allowed key sequence indicated in “Common key sequences” on
page 63.
2. If prompted, choose the appropriate part set.
3.
If prompted, choose areas. See “Areas displayed during set and unset” on
page 16 for more information.
If there are inhibited or isolated zones in selected areas, they are listed on the
display.
4. If you want to continue setting, press Enter. Otherwise, press Clear to cancel
the set process.
See
“Inhibiting / uninhibiting zones” on page 25 and “Isolating / deisolating” on
page 29 for more information.
If programmed, the exit tone sounds. This may be a continuous tone or an
intermittent tone.
The exit tone switches off.
When an area is partially set, its LED lights up red.
If programmed, after a delay the armed display is engaged, and LEDs are
extinguished.
Unset areas via LCD keypad
To unset areas via LCD keypad:
1. Enter the premises using the designated entry/exit route.
An intermittent entry tone starts and the following prompt is displayed:
Enter card/code
to unset
2.
Provide an allowed key sequence indicated in “Common key sequences” on
page 63.
3.
If prompted, choose areas. See “Areas displayed during set and unset” on
page 16 for more information.
The entry buzzer stops and the areas are unset.
LEDs are extinguished, and the time and date is displayed.