United Technologies Interlogix Advisor Advanced ATS1000A-SM Manager Manual Download Page 64

Page: 64 / 100

Advisor Advanced Manager Manual

Note:

When calendar settings change, all cancelled actions become active

again.

9.5.n.8 Area restr

1>Area in schdl
12345678

Restrict the schedule in particular areas. See submenus below for details.

9.5.n.8.1 Area in Schdl

1 Area in schdl
>12345678<

Only in the selected areas the following scheduled actions are allowed: set,
unset, part set, shunt, and area chime. These actions are denied in other areas.

9.5.n.8.2 Auto unset

2 Auto unset
>12345678<

Only in the selected areas auto unset is allowed. This action is denied in other
areas.

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM





































































































Search results

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM

Reviews:

Related manuals for Interlogix Advisor Advanced ATS1000A-SM

Brands by name

Popular brands

United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Search results

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM

Reviews:

Related manuals for Interlogix Advisor Advanced ATS1000A-SM

Brands by name

Popular brands