United Technologies Interlogix Advisor Advanced ATS1000A-SM Manager Manual Download Page 13

Page: 13 / 100

Advisor Advanced Manager Manual

• Battery fail: When the auxiliary battery power is found to be low.

• Trouble: When there is a trouble in the system (keypad fail, low battery, etc).

General alert indicator (EN 50131)

To comply with the EN 50131, this indicator is enabled if the system is unset and
the armed display is active. The alert indicator flashes in case of any fault, alarm,
or pending alarm.

Armed display

Some installations require the use of an armed display.

The armed display prevents unauthorized users from viewing details about the
security system status.

The armed display is deactivated when performing any action that requires an
authorization with a valid user code or a valid badge.

Depending on settings, the armed display can function in different ways:



When the armed display is active, only a general alert message can be

displayed. Area LEDs are off.



When the armed display is active, LEDs are off. The armed display can also

be deactivated on pressing Clear key.

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM





































































































Search results

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM

Reviews:

Related manuals for Interlogix Advisor Advanced ATS1000A-SM

Brands by name

Popular brands

United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Search results

Summary of Contents for Interlogix Advisor Advanced ATS1000A-SM

Reviews:

Related manuals for Interlogix Advisor Advanced ATS1000A-SM

Brands by name

Popular brands