United Technologies Interlogix Advisor Advanced ATS1000A-SM, Manager Manual

Page: 38 / 100

30 Advisor Advanced Manager Manual
Log
3 Display logs
The Display logs list provides you with a quick alarm history. It is a fast and easy
way to determine where alarms have happened. This information is useful when
you have had to reset an alarm without checking its cause immediately.
To view messages, select one of the following message types.
Table 6: Log message types
Option Description
3.1 All All events
3.2 Mandatory Only events that are considered as mandatory by EN 50131-1 (set/part
set/unset, alarms, hold-up, tamper, fault, user change, engineer reset etc.)
3.3 Non mandatory Events other than mandatory events mentioned above
3.4 Installer Events caused by the installer (programming mode, PC connection etc.)
3.5 Access Access events, like access granted and access denied
3.6 Dialer Dialer and communication events
The display shows where the event occurred.
1>Access granted
User 3
You can now:
• Scan recent alarms. Press Up or Down.
• View details. Press Enter.
05May08 15:04:54
System
• Exit history. Exit the alarm history and return to the initial display. Press Clear.
Note: You cannot see events from the area if you don't have permission for the
area, or if the keypad is not programmed for access to the area.