Uninterruptible Power Supplies PowerWave 3000T, User Manual

Page: 47 / 60

UPS469-01-00 PowerWAVE 3000T User Manual Dated 05-04-13
6-1
6
Troubleshooting
6.1 Alarms
In the event of an alarm condition the red
ALARM
LED-indicator will illuminate on the operator control panel
and the audible alarm will sound.
In this case proceed as follows:
1. Silence the audible alarm by pressing the
RESET
button.
2. Identify the cause of the alarm condition by viewing the events register in the main menu (See paragraph
4.3.3) .
3. In case of doubt please contact Uninterruptible Power Supplies Ltd. on 0800 731 3269.
4. Use information provided on the following pages to identify and rectify and apparent fault conditions.
6.2 Menu, Commands, Event Log, Measurements,
A detailed description of the Menu, Commands, Event Log and Measurements that can be operated and
displayed on the LCD can be found in Section 4.
6.2.1 Event log screen
As you step through the event memory, make a separate note of each alarm condition as this will assist in the
identification of any problems.
DESCRIPTION LCD-DISPLAY
1. Logging Control
05-10-00 14-38-56
LOAD TO INV.
2. A log of the last 64 events is stored in the Power Management Display.
05-10-00 14-38-59
LOAD TO BYP.
3. All events and alarms are indicated with their date and time of occurrence.
05-10-00 14-39-14
LOAD OFF