Uninterruptible Power Supplies PowerWave 3000T, User Manual

Page: 13 / 60

UPS469-01-00 PowerWAVE 3000T User Manual Dated 05-04-13
3-1
3
Installation
3.1 Introduction
This chapter contains all the information necessary to enable you to correctly install the PowerWave 3000T
UPS, including unpacking, storage, positioning and cabling instructions.
3.1.1 Receipt of the UPS
The UPS equipment, which includes the UPS cabinet, batteries and accessories, are delivered on pallets that
can easily be moved with the aid of a forklift or a pallet jack. Before you accept receipt of the equipment,
ensure that it is complete and matches the description indicated in the delivery note.
The UPS cabinet is packed in a container that is intended to protect it from mechanical and environmental
damage in transit. This protection is increased further by wrapping and sealing the container in a polythene
sheet.
Upon receiving the UPS equipment carefully examine the packing container(s) for signs of physical damage.
The 'Tip&Tel' (
FRAGILE
and
ARROW
) indicators attached to the exterior of the packaging should be intact if
the equipment has been correctly transported in an upright position. If a 'Tip&Tel' indicator is ruptured or its
integrity is suspect, you must inform both the carrier and Uninterruptible Power Supplies Ltd. immediately.
3.1.2 Site transportation
When locally transporting the UPS equipment after it has been off-loaded please observe the following
precautions.
WARNING: All the operations described in this chapter must be performed by an authorised
electrician or other suitably qualified personnel.
Uninterruptible Power Supplies Ltd. will take no responsibility for any personal or material
damage caused by incorrect cabling or operations, or activities that are not carried out in strict
accordance with the instructions contained in this manual.
CAUTION: When off loading the UPS equipment always keep it in an upright position.
Do not drop the equipment or stack the pallets.
CAUTION: Any visible transportation damages must be notified to the carrier immediately on
receipt and claims for other shipping damage that is discovered when later unpacking the
equipment must be filed immediately when found. All damage claims must be reported to the
carrier within 7 days of receipt of the equipment. If any shipping damage is found you should
store all affected packing materials for further investigation.
WARNING: Do not attempt to install or power-up damaged equipment.
CAUTION: Potential dangers:
– Do not tilt the UPS or Battery Cabinet by more than 10° as it might damage the equipment.
– If the equipment is accidentally tilted do not connect it to the mains electricity supply.
– If dropped, the weight of the UPS and/or battery could cause serious injury to personnel or
damage equipment in the surrounding area. Always handle with care.