pg. 7
WARRANTY
WARRANTY PERIOD
The printing system is warranted to be free from manufacturing defects under the conditions
described in the following paragraph, for a period of 180 days from the date of purchase.
The materials of UNINET
™
are warranted to be free from defects in material workmanship. UNINET
™
cannot be held responsible for the misuse of its products (such as improper handling or printing
methods, utilizing non- genuine UNINET
™
inks) or any other improper use by customer. The
customer is required to use the equipment as prescribed in this manual.
UNINET
™
cannot be held responsible for:
•
Loss or damage to goods occurring during transport;
•
Damage or defects in the goods caused by any act, neglect or default on the part of the
Customer or third parties;
•
Damage resulting from defects in the goods caused by defects in materials or workmanship,
if not objected in writing within 8 days after delivery of the goods.
The replacement of defective material during the first twelve months from the date of purchase of
the machine will be borne by UNINET
™
except for damage or otherwise not dependent on
manufacturing defects.
The warranty excludes consumable or wear/tear parts such as print heads, cartridges, ink, wiper,
dumpers, pipes, pumps and caps.
RESPONSIBILITY
The total liability of UNINET
™
cannot, in any case, exceed the value of the defective, damaged or
not delivered goods, calculated on the basis of the prices charged on the invoice. UNINET
™
cannot
be held liable for damages of any kind arising from failure to fulfil its obligations due to force majeure
(strikes, accidents, disasters, etc...). In such cases, the Buyer shall not be entitled to any compensation.
LOSS OF WARRANTY
Warranty voided in the event of any of the following:
•
Disassembly or modifications to the printer of any kind (including electrical, mechanical,
hydraulic, pneumatic, etc.);
•
Use or maintenance of the printing system other than as intended or indicated in these
instructions;
•
Use of unsuitable materials and inks or cleaning fluids that are not genuine UNINET
™
;
•
Insufficient monitoring of parts subject to wear/tear;
•
Damage as a result of voluntary or involuntary maintenance of machinery and equipment
located in the vicinity of the product;
UNINET
™
assumes no liability for tangible and intangible assets to persons and / or property, the
warranty becomes void immediately and certifications / declarations of conformity are no longer
valid.
JURISDICTION
Any dispute will be referred to Los Angeles County, CA, USA.
The terms shall be construed expressly accepted without reservation
