pg. 16
INSERTING FILM
Follow the steps below to properly insert the film into your printer.
1.
Verify all packing tape has been removed from the printer.
2.
Fully extend the black flap located on the top of the printer, it extends a maximum of three
tiers.
3.
When placing a sheet of film into the printer, you want to ensure the print side is facing you.
The print side of the film is matte, the non-print side is glossy. If you are unsure of what side is
matte, simply scratch a small spot on a corner of both sides, the print side will have residue
come off.
4.
The film is to be placed all the way to the right-hand side, there will be a stationary guide that
the sheet fits into. There is another guide on the left-hand side that can be adjusted by
pressing in the button and gently sliding it so that the film will remain straight when moving
through the printer; you do not want to squeeze the sheet.
*Note:
Only one sheet should be loaded in at a time, loading multiple sheets could result in them
sticking together and damaging the printhead.
Left Film Guide
Right Film Guide
Film loaded correctly
