Unigas KPBY70, Manual Of Installation - Use - Maintenance

Page: 37 / 193

PART III: OPERATION
37
Key A
Used to adjust the “air” actuator position ( A ir):
While pressing the A key, the “air” actuator position can be changed by means of the + and - keys.
Key F + A
While pressing the two keys contemporarly, the code message will appear: by entering the proper
password it is possible to access the Service mode.
Info and Enter keys
Used for Info and Service menues
Used as Enter key in the setting modes
Used as Reset key in the burner operation mode
Used to enter a lower level menu
-Key -
Used to decrease a a value
Used to enter Info and Serivce during the curve adjustments
+Key +
Used to increase a a value
Used to enter Info and Serivce during the curve adjustments
Keys (+ & - )= ESC
By pr and - at the same time, the ESCAPE function is perfomed:
to erase a entered value
to enter a lower level menu