Unigas KPBY70, Manual Of Installation - Use - Maintenance

Page: 191 / 193

Submenu
REG – regulation parameters group :
Menu Parameter Description Additional description Min Max Default U.M.
Visibility
condition Level Modbus
index
REG REGULATION
0
Pb1 Probe 1 0
rES
Set-point Probe 1
(Tank resistor)
Don't modify it
-50,0 200,0 0,0 °C 3 42
AL1
Probe 1 - Low Temperature Alarm
Threshold
Don't modify it
-50,0 200,0 -50,0 °C 3 43
AH1
Probe 1 - High Temperature Alarm
Threshold
Don't modify it
-50,0 200,0 200,0 °C 3 44
d01 Probe 1 differential 0,0 20,0 3,0 °C 3 45
Pb2 Probe 2 0
tCI
Set-point Probe 2
(Plant Consent)
Plant consent according to table
“
Set point adjustment
” -50,0 200,0 120,0 °C 0 46
AL2
Probe 2 - Low Temperature Alarm
Threshold
Don't modify it
-50,0 200,0 -50,0 °C 2 47
AH2
Probe 2 - High Temperature Alarm
Threshold
Don't modify it
-50,0 200,0 200,0 °C 2 48
d02 Probe 2 differential 0,0 20,0 3,0 °C 2 49
Pb3 Probe 3 0
rE3
Type of regulation of probe 3
(Oil tank exit)
Type of regulation
0= thermostat; 1= PID (don't modify) 0 1 1 3 50
OIL Set-point Probe 3 (Oil tank exit)
Nozzle oil temperature according to the
table “
Set point adjustment
” -50,0 200,0 130,0 °C 0 51
AL3
Probe 3 - Low Temperature Alarm
Threshold (Oil tank exit)
Don't modify it
-50,0 200,0 -50,0 °C 2 52
AH3
Probe 3 - High Temperature Alarm
Threshold (Oil tank exit)
Don't modify it
-50,0 200,0 200,0 °C 2 53
Pb3
Proportional band for PID Probe 3
(Oil tank exit)
Proportional band for first PID regulation
0,0 200,0 60,0 3 54
db3
Dead Zone for PID Probe 3
(Oil tank exit)
Dead zone for first PID regulation
0,0 20,0 0,0 °C rE3 =1 3 55
rt3
Integral Time (Ti) for PID Probe 3
(Oil tank exit)
Integral time for first PID regulation
0,0 1000,0 120,0 s rE3 =1 3 56
dt3
DerivativeTime (Td) for PID Probe 3
(Oil tank exit)
Derivative time for first PID regulation
(~ ¼ di rt3) 0,0 300,0 30,0 s rE3 =1 3 57
db3
Dead Zone for PID Probe 3
(Oil tank exit)
Dead zone for first PID regulation
0,0 20,0 0,0 °C rE3 =1 3 55
COD. M12924CA Rel. 0.5 03/2016