Unify OpenStage M3 Plus User Manual Download Page 62

Page: 62 / 89

Setting the handset

Screensavers/caller pictures

Press the display key.

Toggle between the pictures.

If you have saved a picture in an invalid file format, you will see an error mes-
sage after selecting the entry.

Press to exit the menu level.

Sounds

The selected sound is played immediately.

Toggle between the sounds.

You can set the volume during playback.

Press the display key.

[

Select the menu item and confirm.

Adjust the volume.
Save setting.

Renaming and deleting screensavers/caller pictures/
sounds

You selected an entry.

Open the handset's main menu.

[

Select the menu icon and confirm.

[

Select the required menu item and confirm.

Select the entry.

Press the display key. If a picture/sound is blocked (

), the options are not avail-

able.

[

Select the menu item and confirm. The name of the entry can be modified.
Length: up to 16 characters. Then confirm your entry.

[

Select the menu item and confirm. The entry is deleted.

Press to exit the menu level.

Show

Options

Loudspeaker Vol

Save

Resource
Directory

Screensavers

Caller Pictures

Sounds

Memory

Options

Rename

Delete Entry

Summary of Contents for OpenStage M3 Plus


























































































Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands

Unify OpenStage M3 Plus, User Manual

Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands