Unify OpenStage M3 Plus User Manual Download Page 75

Page: 75 / 89

Personal alarm functionality

Language support in Additional Features menu

The Additional Features menu is only available in German and English.

If you choose a language other than German when setting the language, the dis-
play output in the Additional Features menu will be in English.

Alarm types (overview)

Alarm Type

Explanation

Manual personal alarm

Triggered by pressing the red alarm key on the handset.

Automatic personal alarm

Triggered independently by the handset after a

specific time if a defined event occurs and the pre-

alarm (see below) was not confirmed by the per-

son in question:

• Person no longer moving (Non Movement)
• Person falls (Man Down Alarm)
• Person does not respond to the prealarm which

is signalled if there is no input on the handset for
a configurable period (Time Alarm)

• Person loses the handset (Pull Cord Alarm; with

pull cord)

• Person is moving frantically (Escape Alarm)
The particular alarms that are activated on your

handset depend on your handset's PNG configu-

ration. Response times, prealarm times and

acoustic alarm signals can likewise be set on the

handset.
The settings must be performed before the hand-

set is commissioned initially.

Technical warning

If a technical fault occurs on the handset, for ex-

ample low battery charge, you will hear an error

tone.

Prealarm

The prealarm sounds before an automatic person-

al alarm. If the prealarm is confirmed within a cer-

tain time by the user, the automatic personal alarm

is not triggered.

Summary of Contents for OpenStage M3 Plus


























































































Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands

Unify OpenStage M3 Plus, User Manual

Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands