Unify OpenStage M3 Plus User Manual Download Page 45

Page: 45 / 89

Caller lists

All calls are logged in caller lists. There is a separate list for the following call
types:
• Calls for VoiceMail



Page 39 (if set up).

• Missed calls.
• Forwarded calls.
• Answered calls.

Up to ten calls per list are stored in chronological order. Each call is assigned a
time stamp. The display starts with the latest call request still not called. When
several calls are received from one caller, the number of calls is shown.

Entries in the caller lists can be transferred to the redial list.

Working with list entries

Selecting an entry

Either:

Press the message key.

Or:

Press the INT key.

> <

[

Select the menu item and confirm.

> <

[

Select "VoiceMail", "missed", "forwarded" or "answered" and confirm.

> <

[

Select the call and confirm.

Caller lists

Summary of Contents for OpenStage M3 Plus


























































































Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands

Unify OpenStage M3 Plus, User Manual

Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Related manuals for OpenStage M3 Plus

Brands by name

Popular brands