manualshive.com logo in svg

Unify OpenStage M3 Plus, User Manual, Page: 43 / 89

Share
Download
Unify OpenStage M3 Plus User Manual Download Page 43

42

Conducting calls – with multiple users

Second call (call waiting)

If the call waiting function is set up, you can accept second calls on your hand-
set.

When a second call is incoming (call waiting), you will be informed of the second 
call during a call by a call waiting tone and a message on the display. The caller 
hears a ringing tone. You can decide whether to accept or reject the second call.

You can activate and deactivate second calls. If the function is deactivated, the 
second caller hears a busy tone or is forwarded to another number.

Activating call waiting

u

Press the INT key.

> <

 

 

[

Select the menu item and confirm.

 

> <

 

 

[

Select the menu item and confirm. 

 

> <

 

 

[

Select the menu item and confirm. The display shows "activated".

a

Press the On-hook key to end the operation.

To deactivate, repeat the procedure.

Placing the call on hold, accepting the second call

p

You are on a call and hear the call waiting tone.

Open the system menu.

> <

 

 

[

Select the menu item and confirm. You are connected to the second caller. The 
first call is now on hold.

You can now:
• Transfer the call 

 Page 40

• Toggle between calls 

 Page 40

• Initiate a conference 

 Page 41

Telephony

call waiting

deactivated

Menu

answer a call

Summary of Contents for OpenStage M3 Plus


























































































Reviews:

No comments