Unify OpenStage M3 Plus User Manual Download Page 63

Page: 63 / 89

Setting the handset

Checking the available memory

You can show how much memory is left.

Open the handset's main menu.

[

Select the menu icon and confirm.

[

Select the menu item and confirm.

Activating or deactivating the ringer

Deactivating the ringer

Hold down the key until a confirmation tone is emitted. The

icon appears on

the display.

Activating the ringer

Hold down the key until a confirmation tone is emitted.

Activating or deactivating the alerting tone

You can activate an alerting tone instead of the ringing tone. A short beep
sounds for a call instead of the ringing tone.

If the handset is in a call pickup group, a pickup call is also signalled by the alert-
ing tone.

Activating the alerting tone

Hold down the key until a confirmation tone is emitted.
Press the display key within three seconds.

The alerting tone is activated. The volume of the alerting tone is coupled with the
volume of the external ringer.

Deactivating the alerting tone

Hold down the key until a confirmation tone is emitted.

Resource
Directory

Available Memory

Beep on

Summary of Contents for OpenStage M3 Plus


























































































Search results

Summary of Contents for OpenStage M3 Plus

Reviews:

Unify OpenStage M3 Plus, User Manual, Page: 63 / 89

Search results

Summary of Contents for OpenStage M3 Plus

Reviews: