67
Problem Possible
Cause
Suggestion
The system might not be
one your scanner can
scan.
Change to another
system and try scanning
that system.
The data frequency might
be missing.
Enter the data frequency.
Scanner won’t track a
trunked system.
The scanner might need to
be changed to a Type 1
scanner setup.
Change to a Type 1
scanner setup. Review
“Programming Motorola
Systems” on Page XX.
Scanner won’t track a
trunked system.
The system you are trying
to scan might be LTR or
EDACS.
Set the scanner to scan
LTR or EDACS systems.
Review “Programming
LTR Systems” on Page
70 and “Programming
EDACS Systems” on
Page XX.
No ID’s have been
programmed.
Program one or more ID’s
or use the ID Search
mode.
The ID’s you have stored
are not active.
Wait for the ID’s to
become active or scan
another system.
The squelch might need to
be adjusted.
Adjust the squelch
threshold. See “Turning
On the Scanner and
Setting the Squelch” on
Page XX.
Scanner won’t acquire
the data channel.
The frequency used for the
data channel might be
missing.
Check your frequency list
for the data channel.
The scanner might need to
be changed to a Type 1
scanner setup.
Change to a Type 1
scanner setup. See
“Programming Motorola
Systems” on Page XX.
The fleet map might be
incorrect.
Try another preset fleet
map or program your own
fleet map.
One or more of the
system’s frequencies might
not be entered.
Make sure all the
system’s frequencies
have been entered.
Missing replies to
conversations.
The system you are trying
to scan might be LTR or
EDACS.
Set the scanner to scan
LTR or EDACS systems.
Review “Programming
LTR Systems” on Page
XX and “Programming
EDACS Systems” on
Page XX.
If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the
Uniden Parts and Service Division. The address and phone number are listed in the Warranty at the end of this manual. If you would
like immediate assistance, please call Customer Service at (800) 297-1023.
