30
Set Attenuator
●
Set Priority
●
Set Alert
●
●
●
●
●
Set Record
●
●
●
●
●
Set Lockout
●
●
●
●
●
Copy Channel
●
●
●
●
●
Delete Channel
●
●
●
●
●
New Channel
●
●
●
●
●
Programming Conventional Systems
[MENU]
Program System
◙
New System
◙
Conventional
◙
Confirm?
Yes=”E” / No=”.”
[press desired key]
The scanner creates an empty conventional system with a default name of
System n
C
. Note that “n” is a number that
increments as you add new systems. The
C
on the right side of the display indicates that this is a conventional system. After creating
the system:
1. Set system-level settings that apply to conventional systems in “Programming System Settings.”
2. Create one or more channel groups with channels as described in “Programming Channel Groups.”
Programming Trunked Radio Systems
[MENU]
Program System
◙
New System
◙
Then, select the system type:
MOT TYPE 1 –
Motorola Type I systems
MOT TYPE2/P25 –
Motorola Type II and APCO 25 systems
EDCS WIDE/NARROW –
EDACS Wide and Narrow systems
EDCS SCAT –
EDACS SCAT systems
LT –
LTR Systems
The scanner creates an empty system with a default name of
System n x.
Note that “n” is a number that increments as you
add new systems. The “x” on the right side of the display is M for Motorola system, E for EDACS systems, and L for LTR systems.
After creating the system:
1. Set the system-level settings in “Programming System Settings” that apply to the type of system you selected.
2. Set up at least one site for the system as described in “Programming Sites” on Page xx.
3. To scan specific channels, create one or more channel groups with channels as described in “Programming Channel
Groups.”
Programming System Settings
Editing the System Name
MELC
Each system name can be up to 16 characters. Abbreviate as necessary to fit. For Motorola and EDACS Wide/Narrow systems, the
system name only appears in the scanner menu’s Program System listings. It is not shown during scanning. For other systems, the
system name alternates with the Channel group when the scanner stops on a channel.
The default system names include the following letter in the 16th position to indicate the system type:
M
= Motorola;
E
= EDACS;
L
= LTR;
C
= Conventional
S
= SCAT
Specifying the Correct System Type
