31
In order for trunk tracking to work properly, you have to specify the correct system type when you create the system. Here are some
tips for selecting the correct type:
Use online resources, such as the
www.radioreference.com
database, to identify the system type.
Even though a system has digital channels, it is not necessarily a P25 system. To be P25, the system type must be described as
Project 25 (there are many Motorola 800 Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
EDACS Wide is the same as EDAC Standard.
EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU]
Program System
◙
Select the system
◙
Edit Name
◙
To enter a letter, turn the
Scroll Control
until the character you want appears. To enter a decimal point, press
[.No]
. To move the
cursor to the left, press
[4].
To move the cursor to the right, press
[6].
To clear a character, press
[.No]
twice. To clear all characters, press
[.No]
3 times.
To accept an entry, press [
E
YES
]
or
◙
.
Programming System Options
MELCS
Editing the System Quick Key
C
[MENU]
Program System
◙
Select a conventional system
◙
Edit Sys Options
◙
Set Quick Key
◙
After selecting this option, select any number from 0-99 to assign the system to a quick key or press
[.No]
to assign the system to
no quick key, then press
◙
.
Notes:
•
Access single-digit system/site Quick Keys by pressing the single digit on the keypad during scanning. Access two-digit
system Quick Keys by pressing
[.No]
then both digits.
•
You can assign as many systems to the same quick key as you want.
•
To be scanned, a system’s Quick Key must be activated and the system must be unlocked.
Setting the Startup Key
C
[MENU]
Program System
◙
Select a conventional system
◙
Edit Sys Options
◙
Set Startup Key
◙
Select a startup key from 0-9 or select “.” for no startup key.
Notes: