50
Edit Service
◙
Select a service range:
Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast,
FM Broadcast, Military Air, Special
◙
Method Two
◙
(
Func
)
+
[SCAN/SEARCH]
Quick Search? Yes=E” / No=”.”
Press
[.No] then
to
Edit
Service
◙
.
At this point you can edit each of the settings that comprise each custom search range.
The following show you how to set the various option settings associated with a Service. For each, your starting operation is
[MENU]
Search for
...
◙
Edit Service
◙
Select a service range:
Set Delay Time
to select a value from
1 sec
,
2 sec
,
3 sec
,
4 sec
,
5 sec
, and
Off
.
◙
Set Attenuator
to select to choose an attenuation for all frequencies in the range.
◙
On
— the frequencies are attenuated.
Off
— the frequencies are not attenuated.
Set Record
to select to enable a live audio output from
REC
to an audio recording device.
◙
On
— the scanner outputs the signal.
Off
— the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for quick access to your favorite searches.
[MENU]
Search for
...
◙
Set Search Key
◙
Select the key to assign
◙
Select a search range
◙
[MENU]
Search for
...
◙
Now, to access that search, hold on any channel, then press
◙
and the number key
[1]
to
[6]
corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
SRCH 4: FRS/GMRS
