18
Tone-Out
Standby
Press
Switches to Tone Out edit Menu to
change Tone Out Settings
Scan Hold
Press
Start Scanning
Other than Scan
or Scan Hold or
GPS
Press
Instant switch to Scan Mode
Search Hold
[FUNC]
+
Press
Toggle to resume searching
GPS
Press
Toggle to scanner LCD
Scan
Search
Close Call Only
WX Scan
Press
Toggles HOLD on or off; In Close Call
mode, error tone sounds if no frequency
is detected.
[SCAN/
SEARCH]
11
Scan
[FUNC]
+ Press
Toggle ID Search and ID Scan.
Scan
Scan Hold
GPS
[FUNC]
+ Press
Initiates edit menu for current system,
current search range, or current location
data
Menu
Press
Back up one level in the menu.
[MENU]
13
All
Press
Use with Scroll Control to select menu
settings
A Look At The Display
[please use line art for the screen to show the icons and messages -
use as many screens as needed to cover all icons and text on the screen for
different situations]
The display has indicators that show the scanner's current operating status. The display information helps you understand how your
scanner operates.
Operation
Turning On the Scanner and Setting the Squelch
To turn the scanner on, rotate
[VOL]
clockwise. Turn the knob to a comfortable sound level.
Rotate the squelch control
[SQ]
clockwise until you either hear a broadcast or noise just stops. The control is now set for strong
signals. If you desire to hear a weaker signal, turn it counter clockwise from that point until you hear background noise once more.
Startup Key Operation
You can setup a Startup Key Configuration so that when you power up, the scanner can change the lockout state for each system or
each site by pressing an assigned key. Navigate to Set Startup Key there are differences in the menu structure for Trunked and
Conventional systems.