Uniden TRAX353 Owner'S Manual Download

Page: 36 / 132

Page 36

How Do I Use It?

Original position in the Cursor menu

When the Cursor menu is open, a special icon (

) shows the Cursor

position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a
different place. The usual Cursor (

) appears, and the buttons of the

Cursor menu initiate actions for this new location.

To return to the original Cursor position, tap

. The map jumps back to

the position with which the Cursor menu was opened, and the

icon

appears again.

Daytime and night colour schemes

TRAX353 uses different colour schemes during the day and during the

night.
• Daytime colours are similar to paper road maps.
• The night colour schemes use dark colours for large objects to

keep the average brightness of the screen low.
TRAX353 offers different daytime and night colour schemes. It can also

switch automatically between the daytime and the night scheme based

on the current time and GPS position a few minutes before sunrise, when

the sky has already turned bright, and a few minutes after sunset, before it
becomes dark.

Colour scheme in tunnels

When entering a tunnel, the colours of the map change. All buildings

disappear, the large objects (such as surface waters or forests) and the

empty areas between roads become black.
However roads and streets keep their original colours from the daytime or

night colour scheme currently used.
After leaving the tunnel, the original colours return.

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands