Uniden TRAX353 Owner'S Manual Download

Page: 109 / 132

Page 109

How Do I Use It?

Warning settings

You can enable some handy warnings, and disable the touch screen in a

moving vehicle with Safety Mode. Tap the following buttons:

Type

Description

Warn when

speeding

Maps may contain information about the speed limits

of the road segments. TRAX353 is able to warn you if

you exceed the current limit. This information may not

be available for your region (ask your local dealer), or

may not be fully correct for all roads in the map. This

setting lets you decide whether you wish to receive the

warnings. You can set the relative speeding at which the

application warns you (100% is the current speed limit):
• In Built-up Areas: in cities and towns
• Elsewhere: at all other locations
There are two types of warnings. You can turn them on

or off independently:
• Audible Warning: A voice message is played using the

selected voice guidance profile.
• Visible Warning: A symbol with the speed limit appears

in the corner of the map

(for example:

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands