Uniden TRAX353 Owner'S Manual Download

Page: 10 / 132

Page 10

How Do I Put It in My Car?

djuSTinG

The

WindShield

mounT

The adjustment lock keeps both the bracket and the suction cup

►

locked into place. Lift the adjustment lock to change the position of the

device.
The suction cup joint pivots front to back, and the bracket joint pivots

►

up, down, right and left, any just about angle in between.
Angle the suction cup and the bracket where you want them, then

►

push the adjustment lock back down to lock the windshield mount into

position.
If the bracket still moves too easily after you push the adjustment lock

►

down, tighten the bracket joint (lift the adjustment lock, and twist the

lock handle clockwise two, maybe three turns).

The bracket

pivots in all

directions

Lift the adjustment

lock to move the

suction cup and

bracket

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands