Uniden TRAX353 Owner'S Manual Download Page 76

Page: 76 / 132

Page 76

How Do I Use It?

Next two route events (Turn Preview fields)

There are two fields reserved on the Map screen to display the next two

manoeuvres (route events that are listed in the Itinerary). Both the type

of the event (turn, roundabout, exiting motorway, etc.) and distances are

displayed (the top manoeuvre shows the distance from the current GPS

position, and the lower manoeuvre shows the distance between the next

point and the final destination, or 3rd position).
Most of these icons are very intuitive and you also know them as road signs.

The following table lists some of the frequently shown route events. The
same symbols are used in both fields:

Icon

Description

Turn left.

Turn right.

Turn back.

Bear right.

Turn sharp left.

Keep left.

Continue straight in the intersection.

Enter roundabout. The number of the exit is shown in the

circle, but only for the next turn.

Enter motorway.

Exit motorway.

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands