Uniden TRAX353 Owner'S Manual Download

Page: 44 / 132

Page 44

How Do I Use It?

Symbol Description

The camera checks the speed of the direction into which you

are driving.

The camera checks the speed of the opposite driving

direction.

The camera checks the speed in both directions on the road.

The camera can check the speed in any direction.

Speed limit warning

Maps sometimes contain information about the speed limits of the road

segments. This information may not be available for your region (ask your

local dealer) or may not be fully correct for all roads on the map.
You can configure TRAX353 to warn you if you exceed the current limit.

Tap the following buttons:

When you exceed the speed limit, the following happens:
• Visible Warning: A symbol with the speed limit appears in the

corner of the map (for example:

• Audible Warning: A voice message is played using the selected

voice guidance profile.

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands