Uniden TRAX353 Owner'S Manual Download

Page: 107 / 132

Page 107

How Do I Use It?

Units

You can set the distance units to be used by the

program. TRAX353 may not support all the listed units

in some voice guidance languages. If you select a

measurement unit not supported by the chosen voice

guidance language, a warning message will appear.

Set Date &

Time Format

You can set the date and time format. Various

international formats are available.

Time and

Time Zone

Settings

You can access time and time zone settings. TRAX353

helps you with correcting the device time to the ever

accurate GPS time. TRAX353 can also help you set the

time zone based on your current GPS position.

Time and Time Zone Settings:

Type

Description

Auto Time

Correction to

GPS

Use this feature to synchronise the clock of your device

to the very accurate time provided by the GPS receiver.

Use Auto

Time Zone

Use this feature to synchronise the time zone of the clock

of your device to the time zone based on your current

GPS position. This is useful if you travel abroad.

Set Time

Zone

Set time zone manually if you do not want to synchronise

the time zone automatically. This allows you to use Auto

Time Correction and apply a time zone offset to obtain

the desired time.

Navigation settings

You can control how TRAX353 behaves during navigation. Tap the following

buttons:

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands