Uniden TRAX353 Owner'S Manual Download

Page: 130 / 132

Page 130

UNIDEN TRAX353 IN CAR NAVIGATION

Limited One Year Warranty

Please keep your sales docket as it provides evidence of

warranty.

Important:

Evidence of original purchase is required for warranty service.

Warrantor:

Uniden Australia Pty Limited A.B.N. 58 001 865 498

Uniden New Zealand Limited

Warranty is only valid in the original country of purchase.
ELEMENT OF WARRANTY:

Uniden warrants to the original retail owner

for the duration of this warranty, its TRAX353 (herein after referred to as

the Product), to be free from defects in materials and craftsmanship with

only the limitations or exclusions set out below.

WARRANTY DURATION:

This warranty to the original retail owner only,

shall terminate and be of no further effect ONE (1) year after the date of

original retail sale. This warranty will be deemed invalid if the product is;

(A) Damaged or not maintained as reasonable and

necessary,

(B) Modified, altered or used as part of any conversion kits,

subassemblies, or any configurations not sold by Uniden,

(D) Repaired by someone other than an authorized Uniden

Repair Agent for a defect or malfunction covered by this

warranty,

(E) Used in conjunction with any equipment or parts or as

part of a system not manufactured by Uniden, or

(F) Where the Serial Number label of the product has been

removed or damaged beyond recognition.

Warranty only valid in the country of original retail/sale.

NOTE

Summary of Contents for TRAX353





































































































































Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands

Uniden TRAX353, Owner'S Manual

Search results

Summary of Contents for TRAX353

Reviews:

Related manuals for TRAX353

Brands by name

Popular brands