FOODBOX / FOODBOX LONG
Version 3.4 / November 2016
Page 48
2.4.4.1.5 Menu item [1.5 MoDEM]
Menu item “1.5 Modem” enable you to use the modem with the Machine for data transfer to telemetry
server. Available in Machines with modem. in case of permission to use modem, the transferred data is
nullified after each emptying of stacker.
Sub-menu
Description
Value
1.5 GPRS menu
Modem configuration
No
Yes - to sub-
menu
1.5.1 SMS Password
Enter an 8 digit code, using which the server can carry out ini-
tial connection through SMS (manual connection).
in case of manual connection of the Machine the server asks
for access code.
The entered code must correspond with the code indicated in
this menu item, otherwise connection will not be established
Enter an 8
character code
(strict)
1.5.2 ServeriP address 1
Enter iP address and port number for server to which the Ma-
chine would connect.
For the first manual connection to the server (via SMS) this
parameter is set automatically by the server
Enter iP
address
and port number
1.5.3 ServeriP address 2
Enter iP address of the server to which the Machine would con-
nect in case of inability to connect to server 1.
if the server does not have reserve line the second address
must be the same as the first one.
When making first manual connection to the server this param
-
eter is set automatically by the server
Enter iP
address
1.5.4 SiM-cadr PiN code
Enter SiM’s PiN code.
This parameter does not change SiM’s PiN code.
if the SiM’s PiN code is activated, you must enter the PiN code
here, which corresponds with the SiM’s PiN code.
it is not recommended to use PiN code, because in case of
wrong PiN entry the SiM can be blocked
Enter up to 8
characters
1.5.5 GPRS APN
This parameter sets the access point, which will be used to
establish internet connection.
The value of this parameter can be known from the mobile op-
erator
Enter up to 40
characters
1.5.6 GPRS login
Sets login for connection to the mobile provider’s access point.
You can ask for this parameter from your provider
Enter up to 20
characters
1.5.7 GPRS password
Sets the password to connect to the access point of your mo-
bile provider.
You can know the value for this parameter from your operator
Enter up to 20
symbols
1.5.8 Conn.initiat. phone
Sets the telephone number.
Which will be dialled to establish server connection.
To make this parameter effective you must turn on CLi for the
Machine’s SiM card
--ANY PHONE NUMBER--
Enter up to 16
characters
