FOODBOX / FOODBOX LONG
Version 3.4 / November 2016
Page 73
ATTENTION! To avoid the Machine’s tipping over, do not remove all shelves simulta
-
neously.
If the spiral, which are included in the Machine, are not fit for the products that you offer, you can select
other spirals, which have proper sizes and can replace the factory installed spirals.
Rotate the spiral’s left hinge counter-clockwise
(right hinge should rotate clockwise) until the
spiral goes free and then remove the spiral (see
figure 36)
Fig.36 - Spiral holder with spiral
2
1
Install the required spiral on the spiral holder (see figure 37) and
rotate it to fix the spiral.
The spiral in figure 36 shows the left holder.
When using spirals with right hinges, the end of spiral fixes on the
upper groove.
Fig.37 - installing the holder on the new spiral
After changing the spiral replace back the shelf and connect the motors to the connector.
