FOODBOX / FOODBOX LONG
Version 3.4 / November 2016
Page 65
2.5 PRoDUCt LoADING (REPLENISHMENt) AND PRICE tAGGING
To load products into the cells on the shelves it is necessary to open the management compartment’s
door and open the product dispensing compartment’s door in such a way that the doors would not hinder
the movement of shelves.
Pull the shelf fixator, which is located to the left. After this pull out the shelf to the maximum.
ATTENTION! To avoid Machine tipping over it is recommended that you pull out one
shelf at a time. The products should be placed on the shelves in such a way that none
of the products would hinder the passage of products from the cells to the dispensing
tray. Make sure the shelf is pushed back completely after product loading!
For operator’s convenience, some of the upper shelves, when
pulled out have a downward tilt (see figure 27).
Load the products into the gaps between the spiral turns.
It is recommended to start filling the cells from the farthest to the
nearest.
Do not leave empty cells.
After loading move back the shelf until it is fixed in the fixator.
The products should not be cramped inside the spirals.
To avoid product cramping between the spiral turns, change the
product packaging to smaller sizes or change the spiral.
Fig.27 - Loading the products on the Machine’s shelves
The Machine’s package includes inserts with digits.
Separate the tag with the required digits from the sheet and
stick in the space designated for price tags (see figure 28).
Fig.28 - Price tagging
