![background image](http://html2.mh-extra.com/html/unication/uni-voice/uni-voice_installation-manual_3714520067.webp)
Transmitter
Setting
132
Uni Voice
Pager Console
133
Scenario 1
The operator uses U3 as trans-
mitter while operating Uni Voice
Pager Console. The operator’s PC
controls U3 Transmitter via an USB
I/O port. The operator will have to
input the corresponded IP address
in Queue Server software which
installed in the PC for connection
between the PC and the Voice
Pager Console
Scenario 2
In high power circumstances, the
Uni Voice Pager Console allow the
operator to transmit messages
with radio repeater. In this func-
tion, the operator needs to set the
corresponded repeater’s connec-
tion with operator’s personal computer. While transmit-
ting messages, the operator will be able to receive the
call ID, and message content and send these information
to the repeater or transmitter.
■
Transmitter Setting
Step1.Login as Administrtor
Step2.Choose “Transmitter Setting” under “System
Maintenance”
Step3.Click “Edit”, the user will see 7 columns, which
are:
1.
Index
-The number of transmitters
2.
Transmitter Name
-The title of transmitters
3.
Account
-The operator’s account
4.
Password
-The queue server’s password
5.
IP Address
-The queue server’s IP address
6.
Start Date
-The date which queue server start to
operate
7.
End Date
-The date which queue server end op-
eration
8.
On/Off Status
-Queue server’s activating status.
9.
Transmitter Type
-Indicates the transmitter’s on
site / wide area status.
Please input these data columns, if there’s any
wrong data input, the column will be highlighted
with
RED
If the data columns are correctly input, all the col-
umn will stay in white
Summary of Contents for Uni Voice
