Operating Manual for UTD2000/3000
74
comparison without waveform overlapping for the
first and second channels.
2. To measure delay of sine signal caused by
circuit then observe waveform variation.
ķ
ĸ
Delay of automatic measurement channel
To press MEASURE button to display automatic
measurement menu;
To press F1 key to enter into measurement menu
category for selection;
To press F4 key to enter into time measurement
parameter list;
To press F5 key twice to enter into 3/3 page;
To press F2 key to select delay measurement;
To press F1 key to select CH1 then press F2 key to
select CH2 then press F5 as enter key
You can see delay value from “CH1-CH2 delay” in
F1 area.
Observation of waveform variation (shown in
following figure)
Figure 3-2: Waveform delay
