Operating Manual for UTD2000/3000
73
The secondexample: Delay observation of sine
wave signal by circuit
The same as above example, please set
attenuation coefficient of probe and digital storage
oscillograph to 10*. Please connect CH1 channel
of digital storage oscillograph to circuit signal input
terminal and connect CH2 channel to output
terminal.
Operation steps:
1. Signal display of CH1 and CH2 channels:
To press AUTO button
To continue to adjust horizontal or vertical gear
so that waveform display can meet your test
requirements.
To press CH1 key to select CH1 then rotate
vertical position knob to adjust vertical position
of CH
waveform
To press CH2 key to select CH2 then adjust
vertical position of CH2 waveform to facilitate
ķ
ĸ
Ĺ
ĺ
Figure 3-1 Automatic measurement
