96
DC measurement precision (by adopting
average sampling mode)
Measurement precision of voltage
difference (
V) (by adopting sampling
mode of average value)
Ƹ
±
3%
1%
16
± 5%
16
0.2
Ǐ
ǐ
ı
ı
f Ǐ
ǐ
vertical displacement r(
vertical
displacement reading)
To add 2mV when setting from 2mV/div to 200mV/div: To add set
value by 50mV when setting from 200mV/div to 5V/div;
If vertical displacement is 0 and N
0.1 grid+1mV) by selecting 1mV/div or 2mV/div;
±(4% 0.1 grid+1mV) by selecting 5mV/div;
±(3% 0.1 grid+1mV) by selecting 10mV/div to 20V/div;
If vertical displacement is not 0 and N
vertical displacement r(1% vertical
displacement reading)
div;
To add 2mV when setting from 5mV/div to 200mV/div: To add set
value by 50mV when setting from 200mV/div to 20V/div;
×
×
×
×
×
×
×
UTD2000L/2000EX:
Voltage difference between any 2 points on the waveform after
calculating average value for at least 16 captured waveform under the
same setup and environment conditions: ±(3% 0.05div)
×
Note: Deflection coefficient scope of UTD2025C/3025C is 2mV/div ~ 10V/div (in input BNC).
Operating Manual for UTD2000/3000
