24
10.6.4.
Cleaning the Spacer
Observe the surfaces (especially inside electrode surface) of the spacer shown in Fig.
10-14. If the surface color is metallic, the spacer is satisfactory.
If the surface is discolored or stained, polish the spacer after stretching it. First, polish
it with rough sandpaper #180 or #240 until the color becomes metallic and then finish
with finer sandpaper of #400.
Wind the spacer around the side of magnetic pole 1 and shape it into a round shape.
Here, be careful not to bend the spacer.
Fig. 10-14 Spacer
Before polishing
After polishing
Fig. 10-15 Spacer before and after polishing (example)
Fig. 10-16 Rounding the spacer
(Inside)
Inside
Summary of Contents for G-Tran BMR2
Page 2: ......
