14
9.2.
Measurement Value Output
Below measurable greatly lower limi
There is possibility that output voltage is less than 0V due to change
of environmental temperature when output voltage is around 0V.
t
If output voltage value is minus, it shows output voltage is more than
10V (same condition as it does not discharge).
9.2.1.
Measurement value voltage output form
All measurable pressure ranges are output by an analog voltage of 0 to 10 volts
(non-linear). See section 14.1 and section 39 for the relationship between the pressure
(Fig. 9-1, Fig. 9-2) and the measurement value output voltage.
The measurement value voltage is output between the measured value of I/O connector
[8 pin] and GND [10 pin or 15 pin]. See section 4.3.
Fig. 9-1 Pressure-measurement value output graph (Pa)
Summary of Contents for G-Tran BMR2
Page 2: ......
