Ultrasonix SonixTouch Q+, Service Manual

Page: 97 / 148

SonixTouch Q+ Service Manual 00.053.204, Revision A Chapter 8: DICOM
8-1
CHAPTER 8: DICOM
The system uses the Digital Imaging and Communications in Medicine ( DICOM ) standard to share medical information with other
digital imaging systems. The system, by means of the DICOM protocol, communicates with Storage , Print and Modality Worklist
Service Class Providers . DICOM setup/configuration is an Administrator Settings option.
Refer to the following for configuration details:
• Chapter 9: Network Configuration (system network connectivity)
• 8.2 DICOM Configuration .
Figure 8-1: DICOM Configuration
Notes:
When using a hard-wired network connection, ensure the network is connected via a CAT5 cable at the back of the system. (Check
with the local IT Department to ensure that the jack from the wall is live.)
When using a wireless network connection, ensure the wireless network is configured properly and that the system has a live
wireless connection.
Beginning with software version 5.5.0,
DICOM Structured Reporting is supported. Refer to Table 8-2 for Structured Reporting
data transfer options.
Note: Global Settings for the Local Host apply to DICOM Storage , Print and Worklist .