Ultrasonix SonixTouch Q+, Service Manual

Page: 118 / 148

Chapter 8: DICOM 00.053.204, Revision A SonixTouch Q+ Service Manual
8-22
To Configure AE Configuration-Specific Advanced Print Settings:
1.
Tap the touch screen Menu button.
2. Select Administrator > DICOM > Print… > AE Configuration > Settings… > Advanced Print Settings .
3.
Complete Advanced Print Settings as required.
4.
Select OK to accept the changes or Cancel to exit without saving.
To Delete DICOM Print Devices:
1.
Tap the touch screen Menu button.
2. Select Administrator > DICOM > Storage… .
3.
Under Devices , highlight the relevant Name .
4.
Select Delete to remove the device from the list.
5.
Repeat step 3 and step 4 as many times as necessary.
6. Select OK to accept the changes or Cancel to exit without saving.
Note: Refer to 8.1.3.3 for details on these options.