ASSEMBLY STEP
Power supply – computer functions
Power supply
–
Switching the computer on/off.
The computer of your Ergometer is supplied with a 6V 1 A (79) network adapter.
1.
Insert the round jack of the network adapter in the socket at the rear of the Ergometer.
2.
Insert the mains plug in a suitable 230 V~ / 50 Hz socket.
The computer will emit a brief signal tone and the display is activated.
The computer and the magnet brake of the Ergometer are now supplied with power, and the Ergometer
is ready for use.
If no display is visible on the computer, check all jacks and connections.
Switching the computer on/off
The computer will switch on automatically when any key of the computer is pressed or when the pedals
are turned. If any display seems faulty, check all cable connections.
The computer will switch off automatically if the pedals are not turned for about 4 minutes.
After exercising
After you have finished using the Ergometer always remove the mains plug from the socket.
www.ultega.net
8
US