33
32
29
36
35
Step 5
•
Unscrew the Saddle Securing Bolt (35), pull this out all the way to the stop and hold it in this
position.
•
Insert the Saddle Post (33) in the opening.
•
Let the Securing Bolt (35) slide into one of the holes of the Saddle Post (33). Check that the Saddle
Post (33) is secure by trying to move it in both directions. Then screw the Securing Bolt (35) tight.
•
Insert the Saddle (36) on the Saddle Post (32).
•
Adjust the saddle and then screw the Saddle Bolt (32) tight.
ASSEMBLY STEP
Adjusting the handlebars and saddle
•
Adjusting the saddle height and position
•
The height of the saddle can be adjusted
in phases of c. 3 cm and it can be freely
adjusted horizontally. Adjust the saddle
so that you can sit comfortably and
under no circumstances need to fully
extend your knee when the pedal is at its
lowest position.
1.
Hold the saddle post (33).
2.
Loosen the saddle securing bolt (35). Pull
out the black adjusting knob and hold it
in this position.
3.
Push the saddle post (33) into the desired
position and let the securing bolt (35)
snap into one of the holes in the saddle
post. You will hear a clear “click”.
4.
Check whether the saddle post (33) can
still be moved. If this is not the case, then
the securing bolt (35) is in its correct
position.
5.
Now tighten the securing bolt (35).
Attention!
The saddle post must not be pulled out
further than the “max.” marking.
www.ultega.net
6
US
