VLS Service Manual - REV2015.04
Component Removal and Replacement
Page | 42
Component Removal and Replacement
5. Open the front door of the system all the way down ensuring that the door does not rub or interfere with
the cart legs. If the door should come in contact with the cart legs gently pull the cart legs away to
ensure there is no contact between the door and the cart legs.
6. Securely tighten all the screws.
7. Disassembly is opposite of installation.
3. With the assistance of another person, place the system on top of the cart, aligning the pins on the cart
with the alignment holes on the bottom of the system, and loosely install the 4 socket head screws, 4
locking washers, and 4 flat washers attaching the system to the cart. These screws will go through the
cart legs into the bottom of the system.
4. Using the two remaining screws, flat washers, and locking washers, attach the back panel to the rear of
the system.
Summary of Contents for VLS Series
Page 1: ...VLS Service Manual...
