VLS Service Manual - REV2015.04
Y-Axis
Page | 57
Y-Axis
6. Undo the 3 screws (1) that hold the motor mount in place. Disconnect the motor power cable (2) and set
the motor aside.
7. Rotate the long shaft with one hand to locate the Y-axis Drive Gear clamp screw (1). Loosen but do not
remove the screw.
8. Grab hold of the drive gear with one hand and pull the metal shaft (2) out with the other.
9. Remove the drive gear and replace it with a new one.
10. Follow the instructions of
, beginning at Step 5, to finish the installation.
Y-Axis Drive Gears
1. Power OFF and unplug the VLS.
2. Remove the
.
3. On both Y-axis Rails is a Y-axis Belt Clamp. Unscrew all 6 screws, 3 on each clamp, and set the screws
and clamp aside. DO NOT REMOVE the Y-axis Belt from the rail.
4. Loosen all the Y-axis Coupler screws that are near the Y-axis Motor.
5. Slide the couplers away from the Y-axis Motor.
Summary of Contents for VLS Series
Page 1: ...VLS Service Manual...
