UINICS CU-675 Series, Operation Manual

Page: 37 / 44

- 34 -
16．Analog input of adjustment
！ ＜Caution＞
※When the display of analog input voltage is adjusted, please change according to the
following procedure.
If a power supply is switched on pushing, it will become analog input adjustment mode.
Key Display The contents of operation
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ａ．Ｘ Ｘ Ｘ Ｘ
（X is a hexadecimal number
of 0～F.）
If power activation is carried out pushing this
key, it will become the analog input minimum setup
and "A. XXXX" will be displayed.
｢Ａ．～ｂ．community｣
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ａ．Ｘ Ｘ Ｘ Ｘ
It is decimal point lighting of
F at the time of a display of a
registration bit value.
While pressing this key, the registered bit value
can be checked.
※While displaying the bit value registered, the
decimal point of a least significant digit lights
up.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ａ．Ｘ Ｘ Ｘ Ｘ
（Expression bit value）
A push on this key will display the analog input
minimum set value (bit value) registered now.
If this key is pressed inputting the analog minimum
input, the input value (bit value) in that time will
be registered as the analog input minimum.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
ｂ．Ｘ Ｘ Ｘ Ｘ
This key is pressed, it will become the analog input
maximum setup and "b. XXXX" will be displayed.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
ｂ．Ｘ Ｘ Ｘ Ｘ
（Expression bit value）
A push on this key will display the analog input
maximum set value (bit value) registered now.
If this key is pressed inputting the analog maximum
input, the input value (bit value) in that time will
be registered as the analog input maximum.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ａ．Ｘ Ｘ Ｘ Ｘ
is pressed, it will return to the analog
input minimum setup.
Power OFF
Please use the power supply OFF after the end
of registration.
Power ON
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Measurement display
If power supply ON is carried out again, it
will return to a measurement display.
※Please adjust by 4 mA of the minimum analog inputs, and 20 mA of the maximum analog inputs.