UINICS CU-675 Series, Operation Manual

Page: 34 / 44

- 31 -
14．Setting of channel value and change
When you set up channel data, please operate each key as follows.
Operation key Display The contents of operation
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｓ Ｖ
Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ
is pushed.
“SV”is displayed on A～B, and C～L becomes
blank and becomes a SV setting check menu.
If the is pushed, it will return to a
measurement screen.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｃ Ｈ
Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ
is pushed.
“CH”is displayed on A～B, and C～L becomes
blank and becomes a CH setting check menu.
If the is pushed, it will return to a
measurement screen.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｃ Ｈ － ０
Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ
０ ０ １ ０ ０ ０
is pushed.
“CH-0”is displayed on A～D, and Channel preset
value is displayed on G～L.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｃ Ｈ － ０
↑
０～9
Whenever it pushes once, a numerical value goes
up every [ 1 ].
Please set a CH No.
０→１→・・→９→０→
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｃ Ｈ － ０
Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ
０ ０ ０ ０ ０ ０
is pushed.
A preset value is cleared.
Ａ Ｂ Ｃ Ｄ Ｅ Ｆ
Ｃ Ｈ － ０
Ｇ Ｈ Ｉ Ｊ Ｋ Ｌ
０ ０ ０ ０ ０ ０
A preset value is inputted with a ten key (0～9).
is pushed, and a total value will be
changed and it will return to a measurement
display.
is pushed 2 seconds or more, and a preset
value will not be changed but it will return to
a measurement display.
０
９
CH
CH
CH
SV
SV
～