- 9 -
！
・
Power supply confirmation
1）Always turn the power off before commencing wiring work.There is fear of the electric shock.
2）Checking the power input
Please check once again the input voltage.
3）Wire correctly after often confirming the terminal stand label.
4）The wiring technique is different depending on the kind of the sensor、Please refer
P.7 Fig.4 to Fig.6.
Because the sensor power supply is DC12V 100mA MAX（Option：DC24V 60mA）
、Please do not
overload. The sensor and the meter might break down when connecting it by mistake.
5）Do not use the sensor power supply for the usages other than the sensor.
6）Tighten the screw of the terminal stand surely.
Summary of Contents for CU-675 Series
Page 18: ...15 9 The setting menu Test mode...
Page 19: ...16 Various setting operations...
